Effective Ways to Clean Mold Off Your Bathroom

How to Eliminate Molds in Your Bathroom

The bathroom is ideal for mold growth because of the warm, humid climate, and it may develop on almost any surface. Mold in the bathroom might be difficult to remove after it has been discovered. To spruce up your bathroom, follow our mold cleaning advice, which includes recommended solutions, care guidelines for particular surfaces, and helpful preventative advice. To avoid having to combat mold in the bathroom on a regular basis, you’ll want to be sure you get it all.

Cause of Black Mold in Bathroom

Moisture that is trapped somewhere leads to mold growth on the ceiling and other areas in your bathroom. Mold likes moisture very much. Steam from hot baths and showers rises to the ceiling, where it may condense in the absence of adequate ventilation. Mold spores start to increase if the moisture is allowed to stay too long. Mold is not only unattractive, but it may also have negative health effects. Mold can cause nasal stuffiness, coughing or wheezing, throat irritation, eye irritation…or skin irritation, according to the Centers for Disease Control and Prevention. Even more concerning, deadly lung infections can happen in persons with weakened immune systems.

molds in bathroom

How to Prevent Mold in Bathroom

Preventing mold from forming is the best approach to combat it in the bathroom. After taking a shower, remove extra moisture by turning on the exhaust fan for 30 minutes or more. To decrease water in the bathroom, squeegee the shower walls daily after usage. Dry up the floor and take off any wet towels. Another fantastic approach to stop mold from growing is to clean your bathroom once a week.

Effective Natural Cleaning Products for Eliminating Bathroom Molds

You should wear gloves and work through a well-ventilated area while using any cleaning chemicals to remove bathroom mold. Cleaning mold may release mold spores into the air. Thus it is advised that you wear a mask.

Several products on the market guarantee to kill mold, but regular soap and water (as well as some elbow grease) will usually be enough. Additionally, you may assemble a cleaning remedy for bathroom mold with products you already have.

natural cleaning products

1. Borax

Mold in the bathroom can be removed naturally with borax, a white mineral powder. You must combine one cup of borax and 1 gallon of warm water. Fill a spray bottle with a portion of the solution. Onto the area you wish to clean, immediately spray. Use a clean rag, sponge, or scrub brush to get rid of mold spots. Mop the tile or vinyl floors with the leftover borax mold cleaner.

2. Bleach

Another effective solution for removing mold spots in the bathroom is bleach, but you should only use it in a well-ventilated environment. When using bleach, do not forget to open a window or switch on the bathroom exhaust fan. On nonporous items like sinks, toilets, tubs, and showers, a 1:10 bleach to water mixture works well, but you shouldn’t use it to remove mold from the painted ceiling or walls as it may discolor the paint.

3. White Vinegar

Mold in the bathroom may be removed safely and effectively using distilled white vinegar. You may use it straight on the showerhead, drain, or toilet, or you can dilute it to clean tile floors. White vinegar works well to remove mold, despite not having a particularly attractive smell. Vinegar should be sprayed directly on the troublesome region, let it stay for five to ten minutes, and then removed using a sponge or cloth. Scrub using a bristle brush to eliminate mold that is tough to remove.

How to Get Mold Off the Bathroom Ceiling

If you see mold growing on your bathroom ceiling, you must take two actions. Determine the source first. Does the roof of the restroom leak? If so, fix the leak first before cleaning the bathroom ceiling. If the bathroom’s moisture is what’s causing the mold, think about installing an exhaust fan or running a dehumidifier to lessen heat and moisture.

When the source of moisture is fixed, you can start removing the mold from your bathroom ceiling. Spray some vinegar solution on the area to start. Spray the vinegar straight on your ceiling and wipe with a clean towel if the ceiling is painted or has another finish that may be scrubbed. If not, you will need to remove and repair the affected part of the ceiling. It is best to leave the removal of a textured ceiling coated in a mold to a mold removal expert since it calls for specialized ventilation masks and safety clothes.

How to Get Mold Off the Bathroom Walls

Mold may be removed off walls using vinegar in a spray bottle or soap and water, just like bathroom ceilings. Apply vinegar straight on the mold and scrape it away if your painted walls are scrubbable. After letting the area dry, paint it with stain-repellent material. Follow the advice in the next section for cleaning if your bathroom walls are tiled.

It will be challenging to eradicate the mold yourself if it has spread across the wall or into the drywall. Instead, get a specialist to remove the mold. That much mold might be hazardous to your health and spread to other parts of your house if you disturb it.

How to Get Mold Off the Bathroom Tile and Grout

Removing mold off bathroom tile is easy by using vinegar or a borax solution. Mix 2 teaspoons of borax with 2 cups warm water, then pour the mixture into a spray bottle for small applications. It would be best if you sprayed tiles with the solution, then let it sit for a while. As mentioned before, one cup of borax and one gallon of warm water can also create a large-batch tile cleaning solution. To remove the mold, clean with a mop or sponge. There is no need to wash the mixture after using vinegar or borax. However, it would help if you dried the floor to prevent moisture from encouraging the mold to grow again.

Apply the usual borax or vinegar mixture to remove mold from the grout between the bathroom tile. Let it rest after applying it straight to grout lines. To remove mold from the grout of bathroom tile, use an old but clean toothbrush or any small bristle brush. To treat tough stains, create a paste by combining two parts baking soda with one part vinegar. Mold may be removed by applying it to the grout and letting it sit for a short while. You may even make use of a professional grout cleaner if you choose.

About Hellamaid

Hellamaid is a top-rated cleaning company in Ontario, Canada that’s changing the cleaning industry. When we’re not cleaning, we’re sharing helpful content to help clients, communities, and cleaners feel happier, healthier, and safer!

Connect with Us

Hellamaid is a top-rated cleaning company in Canada that’s changing the cleaning industry. Led by two engineers, Ahmed and Abdul,  Hellamaid is on a mission to make cleaning services a better experience for both ends of the market: homeowners and cleaners. We offer value to homeowners through easy online booking and impeccable customer service, while offering a flexible and well paid opportunity to our cleaning partners. Learn more about us here!

Connect with us!